Pump Maintenance and Usage
Maintenance and Testing Tips to Keep Your Pump in Working Order
The risk of a basement or crawlspace flood in Indialantic, FL, is high enough that many homeowners choose to equip their homes with pumping equipment to remove any excess water. Review the following maintenance and testing tips to keep your pump in working order.
1. Routine Testing
While the typical sump pump doesn’t need an excessive amount of care or attention, a checkup here and there can prevent the need for professional flooding cleanup later on. Every few months, ensure that the pump has adequate power and can turn on and off. Take a small amount of water and pour it in the basin near the pump to check that the floating bob and level can rise and fall properly to activate the pumping mechanism.
2. Kinds of Blockage
Even functional pumping equipment will fail to remove water from your basement if the water cannot reach the intake. Check the pump’s inlet screen and remove any accumulated dust, silt, or other debris. If the screen has holes or indentations, find a replacement. Foreign material in the pump mechanism can dramatically shorten its lifespan. Also check the outlet pipe to the yard for clogs and damage, as this can also prevent the pump from moving water. Any cracked or rusted pipes or connections should be replaced, preferably with a silicone-based sealant around the joints.
3. Other Considerations
Many pumps may need additional lubrication around the bearings. If you notice the pump working at reduced efficiency or hear an unfamiliar noise, it may be time to purchase the appropriate grease or oil for your machine. A trash pump is a specialty pump that can remove water mixed with solid debris. Renting one of these from a local dealer may be necessary if your sump pump fails and water floods your crawlspace.
Maintaining your equipment is the first line of defense against home flooding. By scheduling a few simple pump checks, you can prevent costly damage in the long run.